Options · Guide 5 of 12
Reading an Option Chain
9 min read · Updated 1 October 2026
The option chain packs strikes, premiums, open interest and implied volatility into one screen, and learning to read it turns a wall of numbers into a map of market positioning.
What an option chain is
An option chain is a table that lists every available strike for one underlying and one expiry, with calls on one side and puts on the other. For each strike and each side, it shows the key numbers traders use to make decisions: last traded price, open interest, change in open interest, volume, implied volatility and bid-ask prices.
At first glance it looks overwhelming. Once you know what each column means and where to look first, it becomes one of the most information-rich screens in trading.
In VILASA, the option chain shows calls on the left and puts on the right, with strikes in the middle, and horizontal OI bars that let you see where open interest is concentrated at a glance. You can tap any premium to open the order ticket, or send legs to the strategy builder.
The layout
A simplified chain for a hypothetical index at 24,030 might look like this:
| Call OI | Call chg OI | Call IV | Call LTP | Strike | Put LTP | Put IV | Put chg OI | Put OI |
|---|---|---|---|---|---|---|---|---|
| 18,000 | +1,200 | 13.8 | 420 | 23,600 | 22 | 15.6 | +6,500 | 62,000 |
| 25,000 | +2,000 | 13.4 | 245 | 23,800 | 48 | 14.9 | +9,800 | 88,000 |
| 41,000 | +3,500 | 13.0 | 118 | 24,000 | 90 | 14.1 | +11,000 | 95,000 |
| 78,000 | +12,000 | 12.8 | 45 | 24,200 | 212 | 13.6 | +1,500 | 30,000 |
| 1,05,000 | +16,500 | 12.9 | 15 | 24,400 | 378 | 13.5 | −800 | 14,000 |
Strikes run down the middle. Calls are on the left, puts on the right. The numbers here are illustrative, not real data.
Strikes and moneyness
The strike closest to the current underlying price is the at-the-money (ATM) strike. Here, with the index at 24,030, the ATM strike is 24,000.
| Strike vs spot | Calls | Puts |
|---|---|---|
| Below spot (e.g. 23,600) | In the money (ITM) | Out of the money (OTM) |
| Near spot (24,000) | At the money (ATM) | At the money (ATM) |
| Above spot (e.g. 24,400) | Out of the money (OTM) | In the money (ITM) |
Many option chains, including VILASA's, shade ITM strikes differently so you can see the boundary immediately.
Why moneyness matters
- ITM options have intrinsic value, cost more, and move more closely with the underlying.
- ATM options have the most time value and are the most sensitive to changes in volatility and time.
- OTM options are cheap, have only time value, and need a larger move to become profitable.
LTP: last traded price
LTP is the price at which the option last traded. It is the premium you see most often, but be careful:
- In a liquid ATM option, LTP is usually very close to where you can actually trade.
- In an illiquid far OTM or deep ITM option, the last trade may have happened minutes ago, and the current bid and ask can be far away from LTP.
Always look at the bid and ask before placing an order, and prefer limit orders in options.
Worked example: intrinsic and time value from the chain
Index at 24,030. The 23,800 call LTP is 245.
- Intrinsic value: 24,030 − 23,800 = 230
- Time value: 245 − 230 = 15
The 24,200 call LTP is 45. It is OTM, so intrinsic value is zero and the entire ₹45 is time value.
Open interest (OI)
What OI means
Open interest is the total number of outstanding contracts at a strike that have not been closed or settled. Every open contract has one buyer and one seller, so OI measures how many positions are open, not how many buyers or sellers there are.
OI is different from volume:
- Volume counts how many contracts traded today. A contract that is bought and sold ten times adds ten to volume.
- OI counts how many positions remain open. That same contract might change OI by zero if it was opened and closed within the day.
How OI changes
| Trade | Effect on OI |
|---|---|
| New buyer and new seller open positions | OI increases |
| One side opens, other side closes an existing position | OI unchanged |
| Both sides close existing positions | OI decreases |
Reading OI concentrations
Traders often look for strikes with the highest OI:
- A large call OI at a strike above the market is often read as a level where option sellers expect the market to stay below, so it is sometimes treated as potential resistance.
- A large put OI at a strike below the market is often read as a level where option sellers expect the market to stay above, a potential support.
In the sample chain, call OI peaks at 24,400 and put OI peaks at 24,000. A common interpretation would be a range between roughly 24,000 and 24,400 based on current positioning.
Treat this as a description of positioning, not a forecast. OI levels can shift quickly, and large OI does not stop the market from moving through a strike.
VILASA's OI bars make these concentrations easy to spot: longer bars mean more open interest at that strike.
Change in OI
Change in OI shows how much OI has increased or decreased during the current session. It tells you where fresh positions are being built today.
In the sample chain:
- Call OI at 24,400 rose by 16,500 and at 24,200 by 12,000. New call positions are being built above the market.
- Put OI at 24,000 rose by 11,000 and at 23,800 by 9,800. New put positions are being built at and below the market.
Combining OI change with price change
A common framework combines the direction of price with the direction of OI. This is most often applied to futures, but traders apply similar thinking to options.
| Price | OI | Common interpretation |
|---|---|---|
| Up | Up | Long build-up |
| Down | Up | Short build-up |
| Up | Down | Short covering |
| Down | Down | Long unwinding |
These are rules of thumb, not certainties. Each option trade has a buyer and a seller, and you cannot tell from the chain alone who initiated it.
Implied volatility (IV)
What IV means
Implied volatility is the level of future volatility that the market is pricing into an option. It is not measured directly; it is backed out from the option's premium using a pricing model. IV is quoted as an annualised percentage.
- Higher IV means the market expects larger price swings, and options are more expensive.
- Lower IV means smaller expected swings, and options are cheaper.
A rough rule of thumb
An annualised IV can be converted to an approximate one-standard-deviation daily move by dividing by the square root of the number of trading days in a year (about 252, whose square root is roughly 15.9).
Example: index at 24,000, IV 13%.
- Daily move ≈ 13% ÷ 15.9 ≈ 0.82%
- In points ≈ 24,000 × 0.0082 ≈ 197 points
So the market is roughly pricing a typical daily move of around 200 points. This is an approximation, but it is a useful sense check.
IV across strikes: skew
IV is usually not the same for every strike. In the sample chain, OTM puts (lower strikes) have higher IV than OTM calls. This pattern, called skew, is common in equity indices because traders pay extra for downside protection.
IV and events
IV often rises before scheduled events such as budget announcements, policy decisions or results, and falls sharply after the event. This drop, sometimes called IV crush, can cause an option buyer to lose money even if the market moves in the expected direction.
Put-call ratio (PCR)
PCR compares put activity to call activity. The most common version uses OI:
PCR = total put OI ÷ total call OI
Using the five strikes in our sample:
- Total put OI = 62,000 + 88,000 + 95,000 + 30,000 + 14,000 = 2,89,000
- Total call OI = 18,000 + 25,000 + 41,000 + 78,000 + 1,05,000 = 2,67,000
- PCR ≈ 2,89,000 ÷ 2,67,000 ≈ 1.08
How traders read PCR
- A PCR well above 1 means more put OI than call OI. Some read this as supportive, because put writers are active; others read very high values as a sign that sentiment is stretched.
- A PCR well below 1 means more call OI. Some read this as bearish positioning by call writers.
There is no universal threshold, and interpretations genuinely conflict. PCR is best used as one input and tracked over time, not as a standalone signal.
A step-by-step way to read any chain
- Check the underlying price and identify the ATM strike.
- Look at the expiry. Near expiries react faster; further ones have more time value.
- Scan OI bars on both sides to find where positions are concentrated.
- Check change in OI to see where new positions are building today.
- Compare IV at the ATM strike with its recent range. Is it high or low for this underlying?
- Note the skew between OTM puts and OTM calls.
- Calculate or read the PCR, and compare it with previous days.
- Only then decide whether any trade idea makes sense, and check bid-ask spreads before ordering.
Common mistakes
- Treating the highest-OI strike as a guaranteed barrier.
- Ignoring bid-ask spreads and trusting LTP in illiquid strikes.
- Buying options right before a big event without considering IV crush.
- Using PCR as a buy or sell signal on its own.
- Confusing volume with open interest.
Key takeaways
- The option chain lists all strikes for one expiry, with calls on one side, puts on the other and the ATM strike near the current price.
- LTP is the last traded price; always check bid and ask, especially in illiquid strikes.
- OI shows open positions; change in OI shows where positions are building today; VILASA's OI bars make concentrations easy to see.
- IV is the volatility priced into options; higher IV means more expensive premiums, and IV can drop sharply after events.
- PCR compares put and call activity; treat it as context, not a signal.
Educational content only · Paper trading is simulated · Not investment advice.
Educational content, not investment or tax advice. Rates and rules change; check the official source before acting on anything here.