Crypto · Guide 7 of 12
Introduction to Perpetual Futures
8 min read · Updated 1 October 2026
Perpetual futures let you go long or short on a crypto asset with leverage and no expiry date, held in line with the spot price by a periodic funding mechanism.
Where perpetuals come from
Traditional futures contracts, like the index and stock futures traded in India, have an expiry date. On that date the contract settles, and if you want to keep your position you must close it and open a new one in the next month's contract. This is called rolling over.
Crypto markets introduced a different idea: a futures contract that never expires. It is called a perpetual futures contract, or simply a perp. Perps have become the most heavily traded instrument in crypto, often exceeding spot trading volume by a wide margin.
In VILASA, the Crypto side of the app lets you paper trade both spot and perpetual futures. The perp ticket includes a leverage slider, a liquidation price preview and a funding countdown, all of which you will understand by the end of this series.
Spot vs perpetual: the key difference
When you buy bitcoin on the spot market, you own bitcoin. If you pay 6,000 USDT for 0.1 BTC, you have 0.1 BTC in your wallet.
When you open a long perpetual position on bitcoin, you own nothing. You have a contract with the exchange whose value tracks the price of bitcoin. You profit if the price rises and lose if it falls. You can also open a short just as easily, profiting if the price falls.
| Feature | Spot | Perpetual futures |
|---|---|---|
| Ownership | You own the asset | You hold a contract |
| Direction | Long only (buy and hold) | Long or short |
| Leverage | None (1×) | Yes, up to high multiples |
| Expiry | Not applicable | None |
| Holding cost | None | Funding payments (can be paid or received) |
| Liquidation risk | None | Yes, when margin runs low |
How a perp stays close to spot
A normal futures contract converges to the spot price at expiry because it settles against spot. A perpetual never settles, so something else has to keep its price anchored. That mechanism is funding.
Every few hours, typically every 8 hours on many venues, traders on one side of the market pay traders on the other side:
- If the perp trades above the spot (or index) price, funding is usually positive: longs pay shorts. This encourages traders to short the perp and discourages longs, pulling the price down toward spot.
- If the perp trades below spot, funding is usually negative: shorts pay longs, pushing the price back up.
Funding is paid between traders, not to the exchange. It is covered in depth in the next article on funding rates.
Key terms
| Term | Meaning |
|---|---|
| Contract / symbol | For example, BTCUSDT perpetual: a contract tracking BTC, settled in USDT |
| Mark price | A fair price used for P&L and liquidation, based on index prices, to avoid manipulation |
| Index price | An average of spot prices across major venues |
| Last price | The last traded price on the perp order book |
| Leverage | Position size divided by margin |
| Initial margin | The collateral required to open a position |
| Maintenance margin | The minimum collateral required to keep a position open |
| Funding rate | The periodic payment rate between longs and shorts |
| Liquidation price | The mark price at which the position is forcibly closed |
Linear (USDT-margined) contracts
Most retail traders use linear perps, where margin and profit and loss are in a stablecoin such as USDT. P&L is simple:
- Long P&L = (exit price − entry price) × quantity
- Short P&L = (entry price − exit price) × quantity
VILASA's paper perps use USDT as the margin currency, so every example below is in USDT.
Leverage explained
Leverage lets you control a large position with a smaller amount of margin.
Worked example
- BTC mark price: 60,000 USDT.
- You want a long position of 0.5 BTC. Notional value: 0.5 × 60,000 = 30,000 USDT.
- At 10× leverage, the initial margin is 30,000 ÷ 10 = 3,000 USDT.
If BTC rises 2% to 61,200:
- P&L = (61,200 − 60,000) × 0.5 = +600 USDT
- Return on margin = 600 ÷ 3,000 = +20%
If BTC falls 2% to 58,800:
- P&L = −600 USDT
- Return on margin = −20%
Leverage multiplies your return on margin by the leverage factor. A 2% move becomes a 20% gain or loss at 10×. At 50×, the same 2% move would be a 100% change, which means the position would be liquidated well before the price got there.
Leverage levels in VILASA
The VILASA paper perp ticket lets you choose leverage in steps from 1× to 125×. High leverage exists on many venues, but the higher you go, the smaller the price move needed to liquidate you. As a learner, the sensible use of the leverage slider is to see how the liquidation price preview moves closer to your entry as leverage rises, and then choose low leverage.
| Leverage | Margin for 30,000 USDT position | Price move that roughly wipes out margin |
|---|---|---|
| 1× | 30,000 | 100% |
| 3× | 10,000 | about 33% |
| 10× | 3,000 | about 10% |
| 25× | 1,200 | about 4% |
| 50× | 600 | about 2% |
| 125× | 240 | about 0.8% |
In practice liquidation happens even earlier than these figures because of maintenance margin and fees. Crypto regularly moves several percent in a day, and sometimes much more within an hour.
Mark price vs last price
Perp exchanges use a mark price rather than the last traded price to calculate unrealised P&L and liquidations. The mark price is derived from an index of spot prices, often with a small adjustment. This protects traders from being liquidated by a single unusual trade or a short-lived spike on one venue.
When you see your unrealised P&L in VILASA, it is based on mark price. The liquidation price preview is also expressed in terms of mark price.
Fees: maker and taker
Perp trades carry trading fees, usually a small percentage of notional value.
- Maker: your order adds liquidity to the order book, typically a limit order that rests and waits to be filled. Maker fees are lower.
- Taker: your order removes liquidity, typically a market order or a limit order that fills immediately. Taker fees are higher.
Example
Suppose a taker fee of 0.05% and a maker fee of 0.02% (illustrative rates).
- Opening a 30,000 USDT position with a market order: 30,000 × 0.05% = 15 USDT.
- Closing it with a limit order that rests: 30,000 × 0.02% = 6 USDT.
- Total fees: 21 USDT.
Fees are charged on notional, not margin. At 10× leverage, your margin is 3,000 USDT, so 21 USDT of fees is 0.7% of your margin on a single round trip. Frequent trading at high leverage can quietly consume a large share of your capital.
Opening a perp position in VILASA
The perp ticket brings the key choices together:
- Pick the contract, such as BTCUSDT perpetual.
- Choose long or short.
- Choose margin mode: isolated or cross (covered in the liquidation article).
- Set leverage with the slider.
- Enter quantity or notional size, and order type (market or limit).
- Review the liquidation price preview and estimated fees.
- Note the funding countdown, which shows when the next funding payment happens.
- Optionally set a stop-loss and take-profit.
Take a moment at step 6. If the liquidation price is uncomfortably close to your entry, reduce leverage or size before confirming.
Why traders use perps
- Shorting: perps make it simple to profit from, or hedge against, a falling price.
- Capital efficiency: leverage frees up capital, though at a cost in risk.
- No rollover: positions can be held indefinitely, subject to funding.
- Hedging spot holdings: someone holding BTC spot can short a perp to reduce price exposure temporarily.
Example: hedging
You hold 0.2 BTC spot at 60,000 (value 12,000 USDT) and are worried about a short-term drop. You open a short perp of 0.2 BTC at 2× leverage, using 6,000 USDT margin.
If BTC falls to 55,000:
- Spot loss: 0.2 × 5,000 = −1,000 USDT
- Short perp gain: 0.2 × 5,000 = +1,000 USDT
- Net: roughly flat, less fees and funding.
The risks, stated plainly
- Liquidation: with leverage, a normal move can close your position and cost your entire margin for that position.
- Funding costs: holding a position when funding is against you costs money every funding interval.
- Volatility: crypto trades around the clock and can move sharply at any hour.
- Overtrading: easy access to leverage encourages frequent, oversized trades.
This is exactly why perps are worth learning in paper mode first.
Key takeaways
- Perpetual futures are contracts that track an asset's price with no expiry date, allowing easy long or short exposure.
- Funding payments between longs and shorts, typically every 8 hours, keep the perp price close to spot.
- Leverage multiplies returns and losses on margin; VILASA paper perps allow 1× to 125×, and the liquidation price preview shows how risk rises with leverage.
- P&L and liquidation use the mark price, not the last traded price.
- Maker and taker fees are charged on notional value, so they matter more at higher leverage.
Educational content only · Paper trading is simulated · Not investment advice.
Educational content, not investment or tax advice. Rates and rules change; check the official source before acting on anything here.